# t ratioの例文

###### 例文モバイル版

- A number of methods can be used to determine this C : T ratio.
- Note that the V / T ratio is twice as large; so you expect a molar mass twice as high.
- Interestingly, although the buckling strength; higher R / t ratios lead to improved bending strength, but weaker buckling strength.
- If the P / T ratio is low, the impact on product quality of variation due to the measurement system is small.
- When comparing the old t ratio scoring to the newly endorsed median split technique, 42.3 % of participants had a different resulting categorization.
- Generally, a P / T ratio less than 0.1 indicates that the measurement system can reliably determine whether any given part meets the tolerance specification.
- Of these, twenty showed an advantage to the non-grammar forms, of which five were significant, with a t ratio exceeding 3.0.
- Each measurement is taken at three points along the reduced edge ( denoted here by subscript ) and t / T ratios are calculated and averaged to produce the artefact's GIUR value.
- It is common to examine the "'P / T ratio "'which is the ratio of the precision of a measurement system to the ( total ) tolerance of the manufacturing process of which it is a part.
- If the P / T ratio is larger, it means the measurement system is " eating up " a large fraction of the tolerance, in that the parts that do not have sufficient tolerance may be measured as acceptable by the measurement system.
- The difference between the mean increase from first to final essay was 3.694, which had it been feasible to amalgamate the scores of all schools would have yielded a s . e . of 0.616 and a t ratio of 6.00.
- Equally, the amalgamation of scores of all schools for each of the eleven main measures in order to produce an estimate of the significance of differences between grammar and non-grammar methods in the shape of a t ratio would, in view of the lack of randomization and of the probably important systematic differences between the schools in this sort of calculation, have been invalid though it was undertaken.
- This gave the tank a high power-to-weight ratio and made it easily the most mobile tank in service, albeit with acute range problems, as the turbine consumed fuel rapidly, even at engine idle . ( Morozov's subsequent parallel development of the T-80UD replaced the gas turbine with a commercial turbo-diesel, to decrease fuel consumption and maintenance . ) In comparison to its anticipated opponent, the M1 has a larger 1, 500 hp ( 1, 120 kW ) gas turbine, but weighs 61 tons compared to the T-80s 42.6 tons, so it has a worse hp / t ratio of 24.5 compared to 27.1 and is less maneuverable than the T-80 ( with GT ).